| Physical properties | |
| Size（W×H×D） | 34×115×100mm mm |
| Power loss | |
| Rated input voltage | 24V DC |
| Input voltage range | 20.4V~28.8V DC |
| Input current | 0.8A |
| Bus power supply voltage | +5V DC |
| Bus supply current | 1.6A |
| Isolation | External power supply is isolated from system power supply |
| Power protection | The power supply end provides the reverse connection protection function and the surge absorption function |
| LED indicator characteristics | |
| 24V power indicator (green) | ON = 24VDC power supply is normal |
| OFF = No 24VDC power supply | |
| SF indicator light (red) | ON = extended I/O bus failure or EtherCAT module failure，the hardware configuration is not consistent |
| OFF = No error | |
| BF indicator light (red) | ON = EtherCAT bus communication failure (no connection to switch, no network detected) |
| Blinking=Inconsistent hardware configuration | |
| OFF = No error | |
| LINK indicator light (yellow)(Maintenance indicator light)
|
OFF = Unconnected, initialized；Blinking=Pre-operation, safe operation；ON = operation status |
| Indicator light (green) | ON = There is a connection to other Ethercat port |
| ON = No connection to other Ethercat port | |
| OFF = Communication to other Ethercat port | |
info@ofisistelec.com | (+34) 96 144 50 55 |
- Pol. Ind. Virgen de los Dolores C/ Granada, 9 46113 – Moncada (Valencia) España
- (+34) 96 144 50 55
- info@ofisistelec.com