Performance Parameters
| Characteristics | DQT-080S1 | DQT-160S1 | DQT-320S1 | DQR-080S1 | DQR-160S1 | |
| Dimension（W×H×D） | 34×115×100 mm | |||||
| Number of outputs | 8 | 16 | 32 | 8 | 16 | |
| Current consumption
24V DC +5Vbus |
50mA 70mA |
95mA 120mA |
180mA 210mA |
64mA 45mA |
130mA 60mA |
|
| Output Type | Solid -MOSFET, source type | Relay – dry contact | ||||
| Rated output voltage | 24V DC | DC：24V，AC：110V/220V | ||||
| Output Voltage Range | 20.4~28.8V DC | DC：5～30V，AC：5～250V | ||||
| Logic 1 (min) | 20V DC | – | ||||
| Logic 0 (Max) | 0.1V DC, 10KΩ load | – | ||||
| Output current (maximum) | 0.5A | 2A | ||||
| current per common | Max,4A | Max,16A | ||||
| Output leakage current (maximum) | 15uA | – | ||||
| surge current | 8A，100ms | 5A，4s@10%duty cycle
5A,4s @ 10% duty cycle |
||||
| Light Load | 5W | DC：30W /AC：200W | ||||
| Contact resistance | 0.3Ω，up tp 0.6
0.3Ω，max0.6Ω |
up tp 0.2Ω
new device ,max0.2Ω |
||||
| Output Delay | OFF to ON (maximum): 50us
ON to OFF (maximum): 200us
|
max.10ms | ||||
| Output frequency (maximum) | 1KHz | Resistive load: 10Hz
Light Load: 1Hz Inductive load: 0.5Hz |
||||
| Mechanical life (no load) | – | 10，000，000 | ||||
| Contact Life (rated load) | – | 100，000 | ||||
| Isolation
Site to logic Coil to contacts |
500V AC, continued 1min – |
500V AC, continued 1min 1500V AC, continued 1min |
||||
| isolated points per group | 8 | 8 | 8 | 8 | 8 | |
| The number of ONs at the same time | 8 | 16 | 32 | 8 | 16 | |
| Two outputs in parallel | Supports two outputs in parallel within the same group | |||||
| Cable length | Shield | 500m | ||||
| Unshielded | 150m | |||||
